High Temperature Tunnel Ovens SHR-01Z Series Heavy Duty Industry Chain Conveyor

Heavy duty industrial chain +rail conveyor, suitable for high load,with less running wear, long service life, more stable and reliable.

The carrier (fixture) can be different designed, flexible, to meet a variety of complicated loading and unloading process.

Full modular design, convenient maintenance, reduce maintenance time and cost.

Patented hot air system, more efficient hot air convection conduction, faster heat compensation.

New furnace structure design, multi-layer heat insulation, effectively reduce the working environment temperature.

Features:

• Stage temperature control, to adapt to the process requirements of different products, PID temperature control, with good furnace temperature uniformity and better curing quality;
• Hot air circulation, high thermal efficiency, the total power is small, saving more than 25% power than the traditional equipment;
• Special heat insulation structure, the surface temperature of the machine housing is close to the room temperature, reduce energy;
• Modular design, flexible configuration, can meet various process requirements, especially for the products require for long baking;
• It can be used with automatic production line to effectively control manpower, reduce handling, reduce defects, save time and save input cost.

Application range:

• Suitable for heavy load carriers and big fixture conveying；
• Suitable for large capacity, long curing time products, such as: back end baking for audion, solidification baking for Mini LED, etc;
• Suitable for curing the heavy products, such as: new energy vehicle drive motor packaging and baking;
• Suitable for curing and baking process of PCB, LED, Mini LED, capacitor, power supply and other components. It covers electronic products, automotive electronics, semiconductors, 3C products, etc.

Overall diagram:

01 Monitor

02 Exhaust system

03 Chamber lifting unit

04 Heating module

05 Bottom chamber module

06 Top chamber module

07 Conveyor system

08 Conveyor motor

Options:

• Cooling system

1. Pressure charged air cooling

2. Water chiller

• Nitrogen system
• MES interface
• Temperature profile interface
• Buffering system

1. Multi-channel buffer

2. With shifting connection

• Preheating system

The preheating length can be customized.

• Conveyor system

1. Conveying width can be 500mm, 850mm, or to be customized

2. Multi-channel design

• Rack

1.Reserve the installation position for the fixture

• Customized conveying rails

The guide rail conveying mode can be customized according to the product process requirements.

Product Parameters:

Notices:

1.Power requirements:

①Three phase five wire: voltage 380V, frequency 50/60HZ;

②The wire diameter requirement is 16mm² or more, with a leakage protection switch of 125A and a leakage capacity of 150-200mA.

2.The ground is required to withstand a pressure of 1000kg/m².

3.External ventilation requirements: Duct specification 2-Ø150mm; Two exhaust ports, with a single exhaust port having an exhaust volume of approximately 15M³/min.

Founded in Hong Kong in 1984, Suneast technology established its industrial park in Shenzhen in 1999 and listed on the main board of Hong Kong stock exchange in 2000 (Stock Code: 0365. HK).The independent R&D products, like reflow oven, wave soldering machine, selective soldering machine, vertical oven, printer and etc has always maintained a leading position in technology, and provided professional electronic equipment solutions for many well-known enterprises at home and abroad.

With modern industrial parks and advanced R&D facilities, Suneast technology has strong system integration capabilities in R&D, design, production, automation and information equipment manufacturing. Its sales network is all over the world. Suneast technology has been achieved technical strategic cooperation with Tsinghua University, Chinese University of Hong Kong, Hong Kong University of Science and Technology and Harbin Institute of Technology, and its R&D capabilities has reached the advanced level at home and abroad.

In the core area of Guangdong-Hong Kong-Macao Greater Bay Area, Suneast technology has served semiconductor back-end application customers for more than 40 years, its downstream and end customers include Huawei, ZTE, TCL, Hikvision, MLS LIGHTING, DBG, DESAYSV AUTOMOTIVE, SHENZHEN MTC, JFLED, etc.

The dual drive gantry synchronous follow linear motor technology has been successfully applied to a number of high-speed and high-precision equipment manufacturing and processing fields, and gains great praise by users. The new semiconductor packaging equipment, like chip bonder is the masterpiece of Suneast technology, which helps the development of domestic chip industry. Today, Suneast technology has become the leader of China's intelligent equipment industry.

As the core enterprise of Sino ICT Holdings, Suneast technology will strengthen the strategic goal of the group and become a world-class enterprise in the field of high technology.

Culture

Vision

To be the leader in the global SMT intelligent equipment industry and the champion in the semiconductor equipment sub-industry!

Maintain leading technology level, R&D strength, industrial scale, and management model, and become the leader of the global SMT intelligent equipment industry and the champion of the semiconductor equipment sub-industry!

  Mission